As a part of our design, we have included a solid foam border around the entire FoamPlug. This not only increases stability, but prevents miniatures from slipping through the cracks.

9” x 14”

With these FoamPlug thicknesses you can host a wide range of models either standing up or laying on their side.

For the extra large models, we recommend the “sandwich technique.” Use one FoamPlug as the base and then flip another FoamPlug over to gain additional height. Using this method, you can range from 1.25” - 8” of vertical coverage.

1.25”

2”

3”

Expense

9x14”

....$1.25*

Blank FoamTopper

Outer Dimensions

Thickness

PriceUSD

9x14”

....$6.25

1.25” FoamPlug

....$6.50

9x14”

....$6.75

9x14”

....$2.50*

Full FoamTopper

FoamToppers are a thin sheet of foam that are meant to be placed on the top of each stack of FoamPlugs. They are simply a protective sheet of foam.

A 1/4” thick closed cell foam with 1/2” open cell foam.

This FoamTopper will maintain compression and reduce shifting of miniatures during transportation.

2” FoamPlug

3” FoamPlug

9x14”

FoamPlugs are available four thicknesses ::

1.25”, 2”, 3” and 4”.

9x14”

9x14”

....$7.00

4” FoamPlug

9x14”

9x14”

4”

Each FoamPlug is a 1/2” pre-cut pluck foam pattern resting upon a 1/4” closed cell foam base.

The foundation of army storage and transportation.

We had our own cutting dies tooled to ensure that each FoamPlug met our exact specifications.

Each of these pluck layers rest on a 1/4” closed cell firm foam base, making their true thickness ::

1.5”, 2.25”, 3.25” and 4.25”.

*We will include a pair of FoamToppers for each stack of FoamPlugs with the purchase of a carrier at no extra charge.

A single 1/4” thick closed cell foam.

Used to provide most amount of protection and durability while consuming the least amount of vertical height.

See how we rank up to the competition!